Skip to content
Hero photo: waterproofing membrane going down over a bare deck, tile stacked to one side
Tile Roof Waterproofing

Tile Roof Waterproofing in Gilbert, AZ

Protect what matters beneath the tile. Advanced Precision Roofing provides tile roof waterproofing in Gilbert and throughout the East Valley, helping Arizona homeowners protect their roofs from water intrusion, deteriorated underlayment and premature roof failure.

  • Family owned and operated
  • 17+ years in the East Valley
  • Experienced roofing professionals
  • Financing available
Underlayment being installed with the tile stacked aside
close-up of new waterproofing membrane lapped and detailed at a valley

What this is

Your Tile Is Only Part of the Roofing System

Tile may be the most visible part of your roof, but it is not the primary waterproofing layer. The underlayment, flashing and waterproofing components beneath the tile help prevent water from reaching the roof deck and structure below.

As those materials age, a tile roof can begin leaking even when the tiles still appear sound. Advanced Precision Roofing focuses on the entire roofing system—not just what you can see from the ground.

  • Tile lift-and-relay, tile re-used where sound
  • Advanced high-temperature underlayment systems
  • Flashing, valley metal and penetrations rebuilt, not re-sealed
  • Photo-documented before, during and after

Do you need this

Signs Your Tile Roof May Have Waterproofing Problems

A professional inspection can determine whether the problem is isolated or the waterproofing system has reached the end of its useful life.

Leaks and water stains

Ceiling or wall stains and leaks after heavy rain can indicate water moving past the waterproofing layer.

Exposed underlayment

Loose, cracked or displaced tiles may expose underlayment that is already deteriorating.

Deteriorated flashing

Aging flashing at valleys, walls and penetrations can create vulnerable paths for water.

An older, repeatedly repaired roof

Original underlayment and leak repairs that continue to fail can signal a broader system problem.

Scope of work

How Tile Roof Waterproofing Works

We evaluate the existing tile, underlayment, flashing and roof deck, then restore the waterproofing beneath the tile.

Evaluate the roofing system

We inspect the tile, underlayment, flashing and roof deck before defining the scope.

Remove reusable tile

Serviceable tiles are carefully removed and staged so they can be reset.

Replace failed materials

Deteriorated underlayment and waterproofing components are removed and replaced.

Correct vulnerable details

Flashing, penetrations, transitions and other weak points are addressed.

Reset the tile

Reusable tile is reinstalled over the restored waterproofing system.

Inspect the finished roof

The completed system is reviewed to confirm the roof beneath the tile is protected.

Why it lasts

Waterproofing Built for Arizona Tile Roofs

Arizona roofs experience intense heat, UV exposure, wind and monsoon storms. Reliable tile roofing needs properly installed waterproofing beneath the tile, with careful attention to underlayment, penetrations, flashing, transitions and drainage.

New underlayment installed across a large tile roof
Advanced Precision Roofing truck parked in a residential driveway

How it works

How the Project Runs

The same four steps guide every waterproofing project, with direct oversight from inspection through final walkthrough.

  1. 1

    Free inspection

    The owner walks your roof, photographs what he finds, and shows you the condition of the layer under the tile — not just the surface.

  2. 2

    Written scope and materials

    You get a detailed report with photos, the system we recommend, the materials by name, and the price. Financing options if you want them.

  3. 3

    Build

    Tear-off, deck and flashing corrections, then the new system installed to manufacturer spec. Site cleaned at the end of every day.

  4. 4

    Final walkthrough

    We walk the finished roof with you, hand over photo documentation and the manufacturer warranty paperwork, and magnet-sweep the property.

Questions

About tile roof waterproofing

Do you have to replace my tile?

No. On most waterproofing projects the tile is lifted, stacked and re-set. We only replace pieces that are cracked or broken, and we match the profile and colour as closely as the manufacturer still allows.

How is this different from underlayment replacement?

It is the same family of work. Waterproofing describes the system we install; underlayment replacement describes the tear-off of what was there. On most homes you are buying both in one project.

Will you find problems once the tile is off?

Sometimes. Soft sheathing, bad fastening and original construction defects show up on older homes. We photograph anything we find, show you, and price the correction before we carry on.

Service area

Serving the East Valley

Gilbert, Mesa, Chandler, Tempe, Scottsdale and the surrounding East Valley

  • Gilbert
  • Mesa
  • Chandler
  • Tempe
  • Scottsdale
Based in
321 E Pinon Way
Gilbert, AZ 85234
Hours
Monday – Saturday: 7:00am - 6:00pm Sunday: 8:00am – 6:00pm
Call the office
480-255-1115
Service area map — Gilbert, Mesa, Chandler, Tempe, Scottsdale and the surrounding East Valley

Next step

Need a Roofing Company in Gilbert or the East Valley?

Talk with Advanced Precision Roofing about your residential or commercial roofing project. We work with tile, shingle and foam roofing systems throughout Gilbert and the surrounding East Valley.

or talk to the owner direct 480-255-1115